Elevate Your Bathroom - Guidelines To Install A New Shower Unit

Request Free Estimate



Are you currently looking for info on How to Install a Direct-to-Stud Shower Enclosure?


How to Install a Freestanding Shower Unit
A successful shower installation requires careful planning as well as a lot of job. Most of the times, you will certainly need to do three kinds of jobs: mounting walls, installing the plumbing, and completing wall surfaces.

Prep work


Firstly, you should select the sort of shower that you wish to set up. It is very important to identify whether the picked shower can coping with certain systems as well as can control a risk-free degree of water via the central heating boiler. The majority of shower units nowadays are developed to be adaptable to different water pressures (such as saved hot water as well as cool keys).
It is also crucial to think about the water pressure as well as the preparation of the piping and also drainage for the shower

Different Kinds Of Shower Units


  • Push-on Mixer: The tube and spray parts of the push-on mixer shower unit can be linked to the bathroom faucet based on your need, and the water temperature can be changed by means of the faucets. Push-on mixers are cheap and also extremely simple to install. Nevertheless, although the hose pipe link is basic, it is conveniently removed. In addition, it is bothersome to readjust the temperature level.

  • Bath/Shower Mixer: The tube and also spray of this sort of shower are incorporated with a bathroom mixer tap, as well as the temperature level can be adjusted through the bath faucets. It is an extremely economical option and no additional plumbing is entailed. Nonetheless, the bath/shower mixers also struggle with inconvenient temperature control choices.

  • Handbook Mixer: The tube and also spray of a manual mixer shower unit belong of the wall surface unit as well as the hot and cold water materials are linked to a solitary valve The temperature level as well as pressure of the water are managed with either one or a selection of handles (in extra pricey showers). Although temperature level control is a lot easier in hands-on mixer types, they are a lot more costly than the previously discussed mixers. They likewise need additional plumbing of hot and cold water supply pipes.

  • Thermostatic Mixer: The hose and spray of this shower type are a part of the wall surface device as well as the hot and cold water supplies are attached to a single valve here as well. It is total with an integrated stabiliser to self-adjust the water temperature level and also to stop it from coming to be too hot. One of the greatest benefits of a thermostatic mixer shower kind consists of hassle-free temperature level control. Nonetheless, it is one of the most expensive of the different mixer options.

  • Power Shower: A power shower is a solitary device containing an effective electric pump that is capable of changing both the water pressure and also temperature level. This sort of shower can be fitted if there is water supply from a cold water cistern and a warm water cyndrical tube. A power shower makes the modification of both pressure and temperature easy. On the other hand, it disagrees for water warmed directly by the shower or where the water is provided by a mix central heating boiler under mains pressure.

  • Electric Shower: An electric shower is plumbed into a keys cold water supply as well as it heats up the water electrically. It is important to note that for this shower kind to be mounted, the keys pressure requires to be at least 0.7 kg/sq cm (10lb/sq in). The device enables the temperature and stress to be changed via a handle. Designs with temperature level stabilisers are much better as they continue to be untouched by other faucets in other places being used within the family. A significant disadvantage of electric showers is that the control knob only permits the choice of high temperatures at less stress, or reduced temperature levels at a higher pressure. This is problematic in the winter when the spray is often weak as well as the mains water is colder. Nonetheless, this trouble is dealt with in some designs which are available with a winter/summer setting.


  • Approach


    Relying on the kind of shower you want to mount, the shower head should either be fitted in order to prevent its contact with the water in the bathroom below or the base tray, or it must have a check shutoff.
    Prior to starting, it is advisable to note the settings of the shower head and control, and also to prepare the pipe-work involved. In addition, the drain system to remove the drainage will require to be prepared. Both positions of the wire path and also the shower switch will certainly likewise need to be taken into consideration if an instant or electrical shower unit is being set up.
    Use the guideline guide given with the shower system to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is necessary to cut off the water. In order to secure the pipes, they must be given a water-proof covering and also fitted with separating valves. The pipelines can then be hidden right into the wall and also glued over to neaten the total look.
    Fit the base tray, shower head, and also fittings.
    Attach the main shower control to the pipelines that will certainly be supplying the water (This might call for a female screw string adapter).
    Reconnect the supply of water and also test the pipelines for any kind of leaks, as some might require tightening.
    If you are setting up an electrical shower, bear in mind to switch off the electrical energy supply prior to making any kind of electrical links. Once these connections have actually been made (there need to be assistance within the user's manual), the power supply can be changed back on.

    Adjusting Water Stress to Match Your Shower


    The cold water reservoir can be raised to a better elevation (sometimes as low as 150mm (6inches)) by installation a solid wooden support underneath it - perhaps composed of struts and blockboards. If you select this alternative, the main and circulation pipelines will certainly also have to be raised to satisfy the brand-new elevation of the reservoir.
    Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is selected, it needs to be attached into the power supply in order to operate.

    Piping and also Water drainage


    It is best to use 15mm diameter supply pipes, and make the runs to the shower as brief and also straight as feasible so as to maintain maximum pressure as well as reduce warmth loss. In addition, by minimising the use of elbow joints for pipeline edges, you can decrease the resistance in the circulation of the water system. You can accomplish this by flexing the pipelines rather.

    The Majority Of Usual Blunders


  • Violating or overlooking local code restrictions.

  • Using pipes that are too little.

  • Attaching copper to galvanized without using a brass or dielectric fitting in between both.

  • Not making use of tape or pipeline compound at threaded joints.

  • Uneven your components when installing them.

  • Not setting up an air space filling for fixtures.

  • Cutting supply stub outs too brief to mount the shutoff valves onto after the ended up wall surface remains in location.

  • Not correctly aligning tubing right into installations or stop valves. (Forcing the nut onto the compression ring at an angle when the tubes goes to an angle will certainly trigger a leak.).

  • When transforming the water back on in your home, constantly run the outside hose shutoff or flush your commodes to bleed dust as well as air from the lines. This debris can create issues in your sink faucets and also other plumbing trim.



  • Most Popular Shower Enclosure Options to Upgrade Your Bathroom


    Frameless Shower Enclosures


    Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.



    Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.


    In-line Shower Options


    Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.



    You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.


    Semi-Frameless Shower Enclosures


    The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.



    Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.



    You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.


    Glass Block Shower Enclosure


    If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.



    You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.



    Final Thoughts



    Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

    https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/


    How to Install a Freestanding Shower Unit

    We were made aware of that article about How to Install a Freestand through a good friend on a different domain. For those who liked our blog posting please do not forget to share it. Kudos for your time. Please check our website back soon.




    Call Us Now


    Leave a Reply

    Your email address will not be published. Required fields are marked *